Share This Post

Raise the Motorcycle
Utilize a jack or lift to elevate the motorcycle from the floor.

Remove the Wheel
Loosen and detach the tire from the motorcycle.

Break the Bead
Utilize a bead breaker to break the tire away from the rim.

Remove the Tyre
Utilize tyre irons to carefully remove the tyre from its rim, taking care not to damage either one in the process.

Installing a New Tyre

Inspect the Rim
Examine each part of your wheel’s rim closely for potential problems or obstructions such as rocks or glass shards; then, give it a good wipe-down with a damp cloth until all dirt has been removed entirely!

Install The New Tire
Gently place new tires over their respective rims using only enough force necessary so that they stay put without any external help (but still make sure everything lines up correctly). Once this is done, push down firmly around both edges until they are fully seated on every side.

Inflate The Tyre
Pump air into your new tire slowly until reaching designated levels indicated by manufacturers – typically found somewhere outside walls near valve stems where maximum limits should also be printed clearly if not already known beforehand (e.g., 35 PSI max).

Balance The Tyre
Make sure you’re balancing things out! Balancing machines can be found at any reputable garage and should always be used when putting on new tires – especially after being patched up multiple times before hitting those bumpy roads again next week…

Reinstalling the Wheel

Reinstall The Wheel
Push the wheel back onto the bike ensuring bolts get tightened according to what the maker states.

Lower Motorcycle
Put it down gently.

Final Checks
Ensure bolts tighten and check inflation and balance.

Maintaining Your New Tyres

Regular Inspections
Regularly inspect tyres for worn-out spots that may pose risks while riding. Inflation of tyre should also be checked since over or underinflated ones affect mileage.

Proper Inflation
Ensure correct pressure in each tire as recommended by the manufacturer otherwise this will lead to poor handling, fuel consumption, and short lifespan of the tyre.

Alignment and Suspension
Make sure your motorbike’s front-end alignment is within acceptable limits lest you want it to wear unevenly on both sides which could mean trouble while negotiating corners.

Keep motorcycles indoors away from sunlight and other harsh weather conditions especially during winter periods when roads are covered with ice due to extreme coldness outside that can cause premature aging of tires by contracting them too much thereby making them lose their natural elasticity thus becoming brittle enough for stones or nails to penetrate through easily causing severe damage than what might have been experienced had there been no contraction effect at all.

Replacing motorcycle tyres is crucial for any rider. Knowing when and how this process should take place enhances safety while driving a motorcycle. A good choice of tires, following proper installation procedures, and regular maintenance done right will guarantee smooth rides throughout the year. Do not forget frequent checks plus aligning with storage times because these two aspects alone can save someone`s life someday if taken seriously enough! Always inspect your tyres so that you may catch signs of wear early enough before they worsen into dangerous levels leading not only accidents but also extending their longevity hence cutting costs associated with new purchases in case an accident occurs due to negligence towards checking worn-out spots during regular inspections!

More To Explore

company news

Atv tyre pressure

For Optimal Performance, Safety, and Extending Tire Life on Your ATV, It Is Important That You Maintain the Right Tire Pressure The correct tire pressure

company news

Friendway atv tires wheels

ATV wheels are another important aspect of the vehicle that can greatly affect its performance and safety. There are several types of ATV wheels available,